TRUSTED
SINCE
1969

spacerfacebook linkspacergoogle plus linkspacertwitter linkspaceryoutube linkspacerlinkedin linkspacerpinterest link

Killeshal Precast Concrete

tactile studs and strips

Tactile Studs and Strips

KPC offer a range of Tactile Studs and Tactile Strips for use as anti-slip aids and particularly as aids for the visually impaired. Manufactured from high grade (marine grade) stainless steel and available in a variety of finishes, these tactile studs and strips allow quick and easy conversion of existing standard paving to Tactile Paving.

Quickly Convert Existing Paving to Tactile Paving with easy to fit Tactile Studs and Strips

These tactile paving inserts are a excellent alert mechanism for both sighted and visually impaired pedestrians, particularly at bus and rail platforms or at pedestrian crossing points. They are relatively quick to fit as a permanent fixture and remove the necessity to re-pave an area for the provision of better accessibility. Download our product brochure sheet for images and product reference numbers and contact our Technical Sales Team for assistance in selecting and ordering the best studs or strips for your project.

Tactile Studs and Tactile Bars Brochure

 

tactile studsTactile Studs:

Our tactile studs are available in five different styles or finishes. Two of these have textured inserts in the heads.

The two Tactile Studs with head inserts have either a tough carborundum surface pad or a luminous surface pad.

Three of the styles are steel only finishes with no inserts as follows:

  • plain
  • grooved
  • cross-hatched

 

Tactile Stripstactile bars

In addition to Tactile Studs we also offer two types of Tactile Strips for use as safety and directional aids for the visually impaired.

The two types available with our Tactile Strips feature either grooved or knurled surface textures.

Installation Instructions for Tactile Studs and Bars

  1. The relevant standards governing correct layout and orientation for the Tactile Indicators must be complied with and a drilling template positioned and taped to the substrate to avoid movement while drilling.
  2. The holes are individually drilled and the template removed.
  3. Dust and debris is vacuumed from the holes and a quality two part adhesive is injected into each cavity.
  4. The studs are fitted and tapped flush with the substrate with a nylon mallet.
  5. The installation can accept light pedestrian traffic immediately as the stud stems are textured to achieve an interference fit.
  6. Depending on ambient temperate, the adhesive takes 1-2 hours to cure completely.

See more on our Paving range here: KPC Paving


If you would like to know more about our products and delivery services please contact us by phone on 0800 0393367 or by email at info@killeshalprecast.co.uk or you may use the contact form below.


  1. Get In Touch

  2. Our experienced team is available to answer any query you may have on our product range.
    Please fill in the form below and we will respond quickly.

  3. (required)
  4. (valid email required)
  5. (required)
  6. (required)
  7. Captcha
 

Featured Product Line: Pier Caps
Precast Concrete Suppliers UK - Delivery Nationwide ex stock

Call us free on 0800 0393367


Download Brochure